Back to blog

A customer asked for geofencing on Tuesday. It went live on Wednesday.

Product November 18, 2026 6 min read By George Sepiskveradze

HourSquare now checks where people clock in: a circle around the workplace, an on-site code on a screen at the door, and three rules to choose from. What it does, how to turn it on, and what it will not do.

On Tuesday a new customer wrote to our support with a clear question: how do they make sure people can clock in only when they are actually at work? The honest answer was that HourSquare could not do it. People could clock in and out, and a workplace was a name and an address, nothing more. I am George, I build HourSquare, and I had two ways to reply. One was a polite "not yet". The other was to build it. Geofenced clock-in went live the next day. This post covers what it does, how to turn it on, and what it will not do.

What geofencing means here

Geofencing is a boundary drawn around a real place. In HourSquare the place is a workplace. You put a pin on a map and choose a circle around it, from 50 metres to 5 kilometres, with 150 metres as the starting size. When someone clocks in, the browser reads the device's location once, and we work out how far that is from the pin.

Each workplace then follows one of three rules:

  • Off. People clock in from anywhere, as before. Every workplace starts here, so nothing changes until an admin turns it on.
  • Record. People clock in from anywhere, and each entry shows whether they were at the workplace.
  • Require. People can clock in only inside the circle. Outside it the clock-in is refused, and the person is told how far away they are.

Clock-out is never refused. Someone who leaves for a client visit and clocks out from there should not be stuck on the clock.

I would start with Record. A week of entries shows how accurate the readings are in your building before anyone is refused.

The on-site code

A location reading comes from the person's own device, and a determined person can fake it. So there is a second check that does not depend on their device at all.

Put any spare tablet or screen at the workplace and open hub.hoursquare.com/screen on it. Nobody signs in on it. An admin links it once by typing a short code into the workplace's settings. From then on the screen shows a six-digit code that changes every 30 seconds, and people type it when they clock in. It works the same way as the codes in an authenticator app.

The code is aimed at buddy punching, where one person clocks in for a colleague who is not there yet. There is no hardware to buy and nothing to install. A switched-off tablet does not lock anyone out either: when no screen at the workplace has answered for ten minutes, the code is not asked, and those entries are marked so a manager can see it.

What the manager sees

Each entry carries a small label: "At workplace", "Away · 2.3 km" or "Location not shared". On the Today board in Time & attendance there is a count of flagged entries and a filter that shows only those. The same labels appear on timesheets and in approvals, and the attendance report and the time-entry export include them.

Some things are flagged without refusing anyone, such as a clock-in from a device the person has not used before. A flag is a reason to look, and the manager decides what it means.

What we keep, and what we do not

This was decided before any code was written. HourSquare keeps the distance from the workplace, rounded to ten metres, together with the result. It does not keep the position. We never know where a person was. We know how far they were from the pin, at the moment they clocked in and the moment they clocked out. Nothing is read in between.

People see a line under the clock saying that their location is checked when they clock in, and the settings remind admins to tell their team before turning the rule on. A time clock has one question to answer, which is whether someone was at work when they said so. Following people around is a different product, and I do not want to build it.

What it will not do

  • A location in a browser can be faked by someone who really wants to. The on-site code is the stronger check, and the two work together.
  • It runs in the browser, on a phone or a computer. Readings indoors can be rough, which is why the circle has a size and why the reading's accuracy counts in the person's favour.
  • Hours typed in by hand are not location-checked. Neither are clock-ins sent by a hardware clock through our API.
  • A remote workplace has no pin, so there is nothing to check.

How to turn it on

  1. Open Settings, then Workplaces. The table has a "Clock-in location" column.
  2. Press it for a workplace. Find the address or drag the pin, and choose the size of the circle.
  3. Pick Record or Require, and save.
  4. If you want the code as well, switch it on and link a screen.

The step-by-step guide has the details, and the time tracking page shows where this sits next to timesheets, approvals and payroll.

Questions

Does HourSquare track where my employees are?

No. It reads the location once at clock-in and once at clock-out, keeps the distance from the workplace, and does not keep the position. Nothing is read during the day.

What if someone's phone cannot get a location?

Under Record the entry is saved and marked "Location not shared". Under Require the clock-in is refused, and the person can try again once the browser has a reading, or permission to take one.

Do we need to buy a tablet or a time clock?

No. The location check needs nothing but the browser people already use. The on-site code needs one screen with a browser at the workplace, and an old tablet or a monitor is enough.

Can different workplaces have different rules?

Yes. Each workplace has its own pin, circle and rule, and its own code. A head office can require the circle while a second site only records.

This feature exists because one customer asked a clear question. If something is missing for your team, tell us. That is how this one got built.

Sources

Published November 18, 2026. Drafted with AI and reviewed by George Sepiskveradze before publishing.

Share this post

One e-mail a month

New templates, labor-law changes and what we shipped.

Ready when you are

Run HR yourself with HourSquare.

Sign up yourself, no demo needed. Free forever for teams of up to 10 people, and free for now for larger teams.

Free forever up to 10 people · GDPR-native · EU-hosted

HOURSQUARE · EST 2026 HR you run yourself.